STAGE 3 Stage 2 plus Spindles to suit XF type rotor, King pins, Superbell Axle, Multi leaf spring,GT2 Bat wings, Shackles, Perch pins, U bolts and pad, Front backing Plates, Caliper mounts, Steering arms, drag link Rod, Tie rod, Front and Rear 4 Bars (all 4 bar rods are adjustable), Steering box mount, Panard rod and Spreader bars, With Stainless Steel Componentry.

STAGE 1 Frame boxed, fitted with Front Crossmember and Rear Crossmember and k frame fitted

STAGE 2 Frame boxed, fitted with Front Crossmember and Rear Crossmember. K Frame, Engine Mounts, Gearbox Mount, Brake pedal mount, Booster mount, Front 4 Bar mounts, Rear 4 Bar mounts, Rear top and Front top shock mounts and Steering box mount plate.

STAGE 3 Stage 2 plus Spindles to suit XF type rotor, King pins, Superbell Axle, Multi leaf spring, Bat wings, Shackles, Perch pins, Lower Bolt ons, Ubolts and pad, Front backing Plates, Caliper mounts, Steering arms, drag link Rod, Tie rod, Front and Rear 4 Bars (all 4 bar rods are adjustable), Steering box mount, Panard rod and Spreader bars, With Mild Steel Componentry.

32 chassis with front and rear cross members and k frame, fitted with a complete dropped axle front end wit mild steel componentry, reconditioned steering box and steering box mount , engine tube , transmission mount , new brake booster and master cylinder and proportioning valve, s/s through chassis brake fittings and brake lines run, 9 inch diff housing and axles , adjusable mild steel rear 4 bar setup with adjusable panard rod , aldan aluminium adjusable rear coil over shock absorbers, and front and rear s/s spreader bars.

4mm Mild Steel Laser cut in 1 piece. Sold in pairs. Will also fit American Stamping Rails

32 chassis fitted with front cross member rear cross member , k frame complete dropped axel front end with s/s fittings, steering box and mount, engine tube and transmission mount , new brake booster and master cylinder , brake pedal , brake lines with through chassis s/s fittings , 9 inch diff housing and axles , rear adjusable s/s 4 bar set up and panard rod , adjusable aluminium rear coil over shocks, front and rear s/s/ spreader bars

4mm Mild Steel Laser cut in 1 piece. Sold in pairs. Will also fit American Stamping Rails

STAGE 3 M Stage 2 plus Spindles to suit XF type rotor, King pins, Superbell Axle, Multi leaf spring, Bat wings, Shackles, Perch pins, Lower Bolt ons, Ubolts and pad, Front backing Plates, Caliper mounts, Steering arms, Steering Rods, Tie rods, Front and Rear 4 Bars (all 4 bar rods are adjustable), Steering box mount, and Panard rod, With Mild Steel Componentry.

STAGE 1 Frame boxed, fitted with Front Crossmember and Rear Crossmember and k frame

STAGE 2 Frame boxed, fitted with Front Crossmember and Rear Crossmember K Frame Engine Mounts Gearbox Mount and Brake Pedal.

33/34 chassis boxed with front and rear cross members and k frame , complete dropped axle front end with mild steel componentry, steering box and mount plate ,engine tube , transmission mount , brake pedal, s/s through chassis fittings ,brake lines run with s/s fittings , new brake booster and master cylinder with proportioning valve , 9 inch diff housing and axles , m/s adjustable rear 4 bar setup , m/s adjustable panard rod , aldan aluminium rear coilover shock absorbers

33/34 chassis boxed with front and rear cross members and k frame , complete dropped axle front end with stainless stee componentry , steering box and mount plate ,engine tube , transmission mount , brake pedal , new brake booster , master cylinder and proportioning valve , s/s through chassis brake fittings , brake lines run with s/s fittings, 9 inch diff housing and axles , s/s rear adjustable 4 bar setup , s/s panard rod adjusable, aldan aluminium rear coilover shock absorbers

STAGE 3 S Stage 2 plus Spindles to suit XF type rotor, King pins, Superbell Axle, Multi leaf spring, Bat wings, Shackles, Perch pins, Lower Bolt ons, Ubolts and pad, Front backing Plates, Caliper mounts, Steering arms, Steering Rods, Tie rods, Front and Rear 4 Bars (all 4 bar rods are adjustable), Steering box mount, and Panard rod, With Stainless Steel Componentry.

4mm Mild Steel Laser cut in 1 piece Sold in pairs. Will also fit American Stamping Rails.

Stage 1. Boxed chassis with front crossmember k member and tail shaft loop and rear tie rail.

Stage 1. Boxed chassis with front crossmember k member and tail shaft loop and rear tie rail.

these rails are made from 4mm thick 350 graded brite oil pickled steel, and are a folded C section as per original, they incorperate the running board mount holes & all other mounting holes have been centre punched. the boxing plates are also made from the same material as the rails, and are sold as a kit.

STAGE1 CHASSIS Frame Boxed, fitted with Front Crossmember and K & Rear Crossmember

STAGE 2 Frame Boxed, fitted with Front Crossmember and K Frame and Rear Crossmember. Engine Mounts, Gearbox Mount, Brake Pedal mount, booster mount, Front 4 bar mounts, Rear 4 bar mounts, Rear top and front top shock mounts and Steering box mount plate.

STAGE 3 S Stage 2 plus Spindles to suit XF type rotor, King pins, Superbell Axle, Multi leaf spring, Bat wings, Shackles, Perch pins, Lower Bolt ons, Ubolts and pad, Front backing Plates, Caliper mounts, Steering arms, Steering Rods, Tie rods, Front and Rear 4 Bars (all 4 bar rods are adjustable), Steering box mount, and Panard rod, With Stainless Steel Componentry.

stage 1 model A chassis with a complete dropped axle front end with mild steel componentry , steering box and mount plate ,engine tube , hanging transmission mount , new booster and master cylinder , brake pedal ,brake lines run with s/s fittings and s/s through chassis brake line fittings , 9 inch diff housing and axles , mild steel adjustable rear 4 bar setup and panard rod , aldan aluminium rear coil over shock absorbers

stage 1 model A chassis with a complete dropped axle front end with stainless steel componentry , steering box and mount plate , engine tube , hanging transmission mount , brake pedal , new booster and master cylinder , brake lines run with s/s fittings and through chassis brake fittings , 9 inch diff housing and axles , adjustable s/s rear 4 bar setup with panard rod s/s , aldan adjustable rear coil over shock absorbers